Webcast Replay: Benefits and Use of Pro/ENGINEER Manikin Extension

Webcast Replay: Benefits and Use of Pro/ENGINEER Manikin Extension

This presentation and demonstration explains the differences between and the capabilities of Pro/ENGINEER Manikin Lite (free as of Wildfire 4.0 M060), Pro/ENGINEER Manikin extension, and Pro/ENGINEER Manikin Analysis Extension. Topics include: Analyses for material handling, lifting/lowering, push/pull, and carrying. How to insert, position, and manipulate a manikin. How to apply Continue reading
Webcast Pro/ENGINEER Configuration Files – Config.pro & Config.win

Webcast Pro/ENGINEER Configuration Files – Config.pro & Config.win

Configuration files help you to customize and personalize Pro/ENGINEER’s appearance, behavior, and functionality. By taking advantage of config.pro and config.win files, users can optimize the software’s perfomance and convenience, and ultimate maximize productivity. In this presentation and software demonstration, we will discuss the following topics: Config.pro vs config.win The three Continue reading
Webcast Replay: Automating Pro/ENGINEER Drawing Creation with Templates

Webcast Replay: Automating Pro/ENGINEER Drawing Creation with Templates

More than just a drawing format and title block, drawing templates allow for rapid drawing creation with standardized views, notes and more. By leveraging template models along with template drawings, drawing creation time can be halved or more while increasing quality and standardization. Whether every part you design is completely Continue reading
Webcast Replay: Using Pro/ENGINEER Tolerance Analysis Extension

Webcast Replay: Using Pro/ENGINEER Tolerance Analysis Extension

Agenda: Tolerances in Pro/ENGINEER Setup Pro/ENGINEER for analysis CETOL overview Creating tolerance analysis Interpreting analysis results Original air date: February 26, 2010 Complete the form below to download the video presentation (swf format).
Webcast Replay: Overview of Tolerance Analysis in Pro/ENGINEER

Webcast Replay: Overview of Tolerance Analysis in Pro/ENGINEER

Agenda: Why tolerance analysis? What exactly is tolerance analysis? The goal of tolerance analysis Your questions Original air date: December 19, 2008 Complete the form below to download the video presentation (swf format).
Webcast Replay: Freeform Surface Modeling with Pro/ENGINEER

Webcast Replay: Freeform Surface Modeling with Pro/ENGINEER

Agenda   Introduction to freeform surfacing Different surface modeling paradigms The style interface Creating curves in ISDX Creating surfaces in ISDX Analysis tools to verify quality and smoothness of design Referencing a parametric framework Orignal air date: 07/16/10 Complete the form below to download the video presentation (swf format).
Webcast Replay: Advanced Parametric Surfacing with Pro/ENGINEER

Webcast Replay: Advanced Parametric Surfacing with Pro/ENGINEER

Agenda: Parametric surfaces overview Curves Sketched Trough points Tweaking curves Blends Boundary blends Lofts Patches Sweeps Merges Surfacing Tips and tricks Robust design considerations Live product demo Questions and answers Original air date: 06/11/10 Complete the form below to download the video presentation (swf format).
Webcast Replay: Pro/ENGINEER Wildfire 4.0 Parametric Surfacing Basics

Webcast Replay: Pro/ENGINEER Wildfire 4.0 Parametric Surfacing Basics

Agenda Surfacing Basics Surfacing Terms and Workflow Converting Surfaces to Solids Using Datum Points and Curves Review of Surface Modeling Tool Orignal air date: 05/15/09 Complete the form below to download the video presentation (swf format).
Webcast Replay: Pro/ENGINEER Mechanism Dynamics Option

Webcast Replay: Pro/ENGINEER Mechanism Dynamics Option

Agenda: Incorporating springs, dampers, motors, friction, gravity, and custom dynamic loads to evaluate product performance Using design studies to optimize the mechanism’s performance over a range of input variables Size motors, springs, and dampers Designing and evaluating CAM and slot profiles for peak performance Creating accurate motion envelopes for use Continue reading
Webcast Replay: Pro/ENGINEER Plastic Advisor

Webcast Replay: Pro/ENGINEER Plastic Advisor

Agenda: Configuring Pro/ENGINEER Plastic Advisor to work on your machine How the design engineer ensures the part is manufacturable What do you change if the first part doesn’t mold properly? Determining where to gate the part and where to put risers Original air date: October 30, 2009 Complete the form Continue reading